If your laptop charger’s input or DC jack malfunction, they can be repaired.

Laptop computers typically get power from two sources: the AC/DC adapter cord, and the lithium ion battery. The AC/DC adapter plugs into the electrical outlet and connects into the input charger jack in the computer. Most laptop computer batteries can carry a charge for up to three hours. After that, the laptop will need power for the adapter cord. If the input charger jack is malfunctioning, it will need repair before your computer can charge from the adapter cord.

1.Set the computer face down. Remove screws from the bottom with a Phillips screwdriver. Pull off the case cover and place the screws and cover in a safe location for later.

2.Loosen and remove the screws connecting the hard drive housing. Slide off the housing and pull out the hard drive.Like hp laptop ac adapter

3.Engage the battery release lever with your fingers and take out the battery. Store the battery in a safe location for later.

4.Undo the latch that secures the computer screen, using your fingers. Pull the screen away from the rest of the computer but leave the wires intact. Set the laptop to the side.

5.for example HP 613159-001 replacement laptop ac power adapter Hold the blade of a flat-head screwdriver against the indentation on the right side of the computer, slightly above the keyboard. Firmly push against the handle with your hand to pry up the edge of the keyboard bezel. Remove the bezel and set it aside.

6.Unscrew the screws holding the keyboard and remove it. Place it face down and pull out the ribbons connecting the keyboard to the motherboard.

7.Find the metal jack that is attached to the motherboard. HP ADP-65HB FC adapter The jack most likely has moved out of place, which is the reason it is not working. If this is the case, reinsert the jack into the grooves and add glue for extra security. If the jack is damaged, replace it where the old one was and add glue.

8.Reassemble the laptop. Start by reconnecting the keyboard ribbons to the motherboard and replacing the keyboard. Replace the screws on the keyboard bezel. Put the screen back and redo the latches. Slide the hard drive back in place and replace the housing. Replace the battery and cover. Turn on the computer and test the power jack.

tips from:www. cheapbatterystore.com.au