Laptop Battery Maintenance – 1, activate the new battery want your notebook battery longevity, there must be a good start, which was to buy a notebook from talking about. Asus A42-G74 Battery at the first boot with 3% of the electricity (which is also common practice firms The first time you open a buy notebook, the battery is fully charged, must be used by others), , you should not use an external power supply, the Asus A42-G75 Laptop Battery inside the power exhausted, until the shutdown, then use the external power supply charge. Home, but also the exhaustion of the battery after the charge, charging time must be more than 12 hours, repeated three times to activate the Asus A42-G73 Battery, so as to lay a good foundation for future use.
Laptop Battery Maintenance – 2, to minimize the number of Asus G74 Laptop Battery This method gives the feeling seems to be some stingy, but it is also the most effective. You know, the number of battery charge and discharge is directly related to the life of one charge, the battery forward to retirement a step. We recommend that you use an external power supply, use an external power supply when the Asus G75 Battery removed. Some friends of convenience, often several times a day the power plug, and the laptop is equipped with batteries, do more damage to the battery. Because each external power access equivalent to the Asus G74JH Laptop Battery charge time, battery life shortened by a naturally.
Laptop Battery Maintenance – 3, power exhaustion after the charge and avoid charging time is too long regardless of your notebook uses lithium or nickel-metal hydride power, be sure to charge after the exhaustion (capacity less than 1%), which is the best way to avoid the memory effect. Saying there is no memory effect on lithium, I note in front of businesses irresponsible misled. Lithium also have memory effect, but its memory effect smaller than nickel-metal hydride Bale. Mobile phone Asus K56C Battery charging method, when you charge the Asus K46C Laptop Battery to the laptop, try to avoid too long, the general control within 12 hours. As for the prevention of exposure to prevent damp to prevent the erosion of chemical liquids, avoid battery contacts with metal objects such considerations, much to mention here also